A safer and more effective solution for adhesive removal
When it comes to removing adhesives on production equipment, dry ice blasting is hard to beat. The extreme cold from the dry ice actually makes the glue brittle, so it breaks away from the surface much more easily. And since the process is non-abrasive and doesn’t leave behind any extra mess, you can clean equipment more often without worrying about wear and tear. That means less downtime and longer-lasting machines. Dry ice blasting is non-abrasive and does not produce secondary waste, which leads to more regular cleaning and prolonged equipment life. This innovative technique is an excellent choice for efficient adhesive removal.
Dry ice cleaning is an innovative cleaning technology that can save both time and money in the oil and gas industry. It is similar to other types of media blasting but utilizes recycled CO2 in the form of solid dry ice particles as the cleaning media.
Dry ice is a soft media and non-abrasive on many surfaces so it can be used to effectively clean delicate components and equipment without damage. Because it is a dry clean, it can be used around electronics and other sensitive components where cleaning with water or other solvents would normally be problematic.
As the ultimate clean-in-place tool, dry ice minimizes disassembly and pre-job preparation time – and because the dry ice turns into gas upon contact with the substrate, cleanup time and disposal costs are reduced and foreign grit contamination to sensitive moving parts is eliminated.
Dry ice blasting can efficiently clean the following at your oil and gas facility:
Convection section or re-boiler
Fin-fan
Heat exchanger
Interior & exterior wall cleaning
Pipeline
Production equipment
Reactor screen
Rotating equipment
Surface preparation of pressure vessels
Shell side tube bundle
Sulfur removal
Join industry leaders already benefiting from Carmad’s dry ice blasting services including rentals.
Case Study - Dry Ice Blasting Facility saves 20-30% on Energy Costs 4
Manufacturers and service providers feel the effect of today’s energy expense and price increases. Most decision makers believe the solution to the problem is to find the lowest available energy prices.
Electric motors waste up to 50% of electric energy due to inefficient motor optimization.
Some reasons for inefficiency at a facility include: high ambient temperatures, unbalanced voltage, improper loading, inadequate ventilation, misalignment, vibrations, improper lubrication, and most importantly, contamination.
Contamination is a surface coating that causes electric motors to run hotter than normal. By design, electric motors have cooling fans that draw air over the external shell. If not properly cleaned, contamination will build up over time and clog and defect the motor’s ability to cool itself and run at ambient temperature. Hot, contaminated motors running in these conditions increase the amount of energy and thus, increase the cost the motor needs to operate.
THE PROBLEM
The most common way to clean electric motors is to take them out of service and clean manually with rags and industrial solvents. To avoid this interruption in production, cleaning is often delayed extensively, which leads to an inefficient motor and/or eventual motor failure. Most of the industrial solvents used have a very low flash point, creating a fire hazard and possible outages. They also emit unhealthy fumes and the manual application of the solvents leaves secondary debris such as lint and cloth on the motor surfaces.
Additional methods of motor cleaning include soda blasting, walnut shell blasting and pressure washing or steam cleaning. Soda and shell blasting can be too abrasive for the motors and require a system shutdown. Pressure washing or steam cleaning the electrical system of a hot, running motor can create a highly dangerous situation.
THE SOLUTION
Reduce facility cleaning time and production line interruptions with Carmad’s dry ice blasting solutions.
At Carmad Industrial, we specialize in cleaning and restoring facilities, factories, plants and equipment. Dirt, grime, grease and oil buildup in production facilities may cause equipment to function improperly and can cause an unsafe working environment. Effective dry ice cleaning extends the life of electric motors, reducing or eliminating costly repairs, replacement or rental programs. However, manual cleaning is often delayed to prevent facility production line shutdown. Dry ice cleaning provides a quick, safe and economical solution that allows equipment to be cleaned in-place without disassembly or cool down.
This “anonymous company” was the first to recommend Carmad’s Cold Jet dry ice blasting for motors. They have discovered an overall cost savings – with both electricity usage and man hours – when using dry ice versus alternative methods.
Carmad’s dry ice cleaning provides a quick, safe, non-toxic and economical cleaning solution for facilities, industrial equipment, machinery, machine tools and assembly line equipment. It has met the Electrical Industry’s challenge of operating efficiency and uptime because dry ice cleaning can restore both rotating and stationary electrical equipment to peak performance with dramatically shorter outages. Dry ice cleaning cleans in-place without major disassembly or cool down and is non-abrasive, non-conductive and non-corrosive. It is a completely dry and clean process as it does not use water. The cleaning media, dry ice, sublimates upon impact, disappearing without adding secondary waste. The only waste is the material being removed. The Carmad Dry Ice equipment can clean on and around hydraulic power units and electrical power and distribution components and minimize the disposal of hazardous wastes. When pertaining to general maintenance and facilities cleaning, cleaning time can be reduced up to 80% with Cold Jet dry ice cleaning.
This innovative approach not only enhances operational efficiency but also significantly lowers energy consumption. By utilizing dry ice blasting, facilities can achieve energy savings of 20-30%, contributing to both environmental sustainability and reduced operational costs. The advanced technology employed by Carmad ensures that maintenance processes are streamlined, allowing for a rapid return to full operational capacity. As a result, this method positions organizations to achieve both productivity gains and financial benefits in their maintenance routines.
Fire Remediation – Remove fire and smoke damage quicker and more efficiently
Dry ice blasting has been proven to be a faster and more effective solution in remediation efforts.
Dry ice blasting is quietly changing the way insurance companies handle fire damage claims, especially when it comes to cleaning up commercial buildings and residential properties. Instead of the old, painstaking methods that often required tearing out walls or scrubbing for days, companies like Carmad Industrial are using dry ice cleaning to wipe away years of frustration—along with soot, char, and even that stubborn burnt smell that tends to linger after a fire.
What sets Carmad Industrial apart isn’t just the speed of their cleanup, though that’s a big part of it. Their method gets into places that most people wouldn’t dream of reaching: tight spots between trusses, awkward angles around nails and wiring, even behind plumbing. And it does all this without leaving a scratch on the surfaces themselves. No water, no chemicals, no residue—just a clean slate, ready for whatever comes next.
For insurance providers, this means fewer costly repairs and replacements, faster turnaround times, and ultimately, a lot less money spent on each claim. For property owners, it means getting their spaces—and their lives—back to normal that much sooner.
Carmad Industrial travels to remote locations all over Alberta, British Columbia and The North West Territories. We get to see some pretty neat things along the way.
Oil & Gas is a main industry where we will travel to remote locations. Shack cleaning is very important to maintain the equipment and keep everything running. Once blasted, we paint floors & pipes.
For more information about our dry ice blasting services and where we go, call us at 587.809.6529.
Increase the life of your mining equipment with CO2 Dry Ice Blasting. Carmad Industrial has everything ready to come to your site, all year long giving you no down time, a deep clean to prolong your equipment life with a safe process that is eco-friendly. Dry Ice Blasting removes all dirt, grime, tar, and bitumen residue easily! Call us for more info – 587.809.6529.
Carmad Industrial Ltd. remains open to be able to service all of Western Canada with dry ice sales that are needed to deliver food & beverages for our clients.
Carmad also a leading company in dry ice blasting services that will instantly kill and eliminate bacteria & will keep your equipment running properly.
Call for more information or to order dry ice. 587.809.6529
We’re dry ice blasting decals today in YEG! Dry Ice Blasting will remove decals from your fleet in just a fraction of the time, saving you money and reducing downtime. No scraping required!
